PicoScope 3400 High–Performance 4–Channel USB Oscilloscopes

PicoScope 3000 Series DSO/MSO

PC Oscilloscopes & Mixed Signal Oscilloscopes with Power, portability and performance
  • 200 MHz analog bandwidth
  • 1 GS/s real-time sampling
  • 512 MS buffer memory
  • 100,000 waveforms per second
  • 16 channel logic analyzer (MSO models)
  • Arbitrary waveform generator
  • USB 3.0 connected and powered
  • Serial decoding and mask testing as standard
  • Windows, Linux and Mac software


200 MHz USB 3.0 oscilloscopes with 16 channel logic analyzer

PicoScope 3000 Series USB-powered PC oscilloscopes are small, light, and portable and can easily slip into a laptop bag while offering a range of high-performance specifications.

These oscilloscopes offer 2 or 4 analog channels and a built-in function / arbitrary waveform generator. MSO models add 16 digital channels.

Supported by the advanced PicoScope 6 software, these devices offer an ideal, cost-effective package for many applications, including embedded systems design, research, test, education, service, and repair.


Advanced digital triggers

Oscilloscope digital triggers The majority of digital oscilloscopes still use an analog trigger architecture based on comparators. This causes time and amplitude errors that cannot always be calibrated out and often limits the trigger sensitivity at high bandwidths.

In 1991 Pico pioneered the use of fully digital triggering using the actual digitized data. This technique reduces trigger errors and allows our oscilloscopes to trigger on the smallest signals, even at the full bandwidth. Trigger levels and hysteresis can be set with high precision and resolution.

The reduced rearm delay provided by digital triggering, together with segmented memory, allows the capture of a new waveform every microsecond until the buffer is full.

The PicoScope 3000 series offers an industry-leading set of advanced triggers including pulse width, windowed and dropout.  In addition logic triggering allows you to trigger the scope when any or all of the 16 digital inputs match a user-defined pattern.

More information on Triggers, advanced >>

Hardware Acceleration Engine (HAL3)

fast oscilloscope waveform update rateSome oscilloscopes struggle when you enable deep memory; the screen update rate slows and controls become unresponsive. PicoScope 3000 series avoids this limitation with use of a dedicated hardware acceleration engine inside the oscilloscope.  Its massively parallel design effectively creates the waveform image to be displayed on the PC screen and allows the continuous capture and display to the screen of over 440 million samples every second.  PicoScope oscilloscopes manage deep memory better than competing oscilloscopes, both PC-based and bench-top.

The PicoScope 3000 series is fitted with third-generation hardware acceleration (HAL3). This speeds up areas of oscilloscope operation such as allowing waveform update rates in excess of 100,000 waveforms per second and the segmented memory / rapid trigger modes. The hardware acceleration engine ensures that any concerns about the USB connection or PC processor performance being a bottleneck are eliminated. Hardware acceleration ensures fast screen update rates even when collecting 10,000,000 samples per wavefor

100,000 waveforms per second

oscilloscope persistence mode

Persistence mode rapidly superimposes multiple waveforms on the same view, with more frequent or newer waveforms drawn in brighter colors than older ones. This emulates the phosphor display of a conventional analog scope and is useful for displaying and interpreting complex analog signals such as video waveforms and analog modulation signals.

More information on color persistence modes >>

Hardware acceleration (HAL3) allows waveform update rates of up to 100,000 per second in Fast persistence mode – allowing you to collect thousands of waveforms per second in order to quickly spot glitches and observe jitter.

Waveform buffer and navigator

waveform buffer

Ever spotted a glitch on a waveform, but by the time you’ve stopped the scope it has gone? With PicoScope you no longer need to worry about missing glitches or other transient events. PicoScope can store the last ten thousand waveforms in its circular waveform buffer.

The buffer navigator provides an efficient way of navigating and searching through waveforms effectively letting you turn back time.  Tools such as mask limit testing can also be used to scan through each waveform in the buffer looking for mask violations.

Mask limit testing

Mask limit testing - good waveform

Waveform mask limit test – Pass

Mask limit testing allows you to compare live signals against known good signals, and is designed for production and debugging environments. Simply capture a known good signal, draw a mask around it, and then attach the system under test. PicoScope will check for mask violations and perform pass/fail testing, capture intermittent glitches, and can show a failure count and other statistics in the Measurements window.


PicoScope can be programmed to take an action when certain conditions are met PicoScope can be programmed to execute actions when certain events occur.

The events that can trigger an alarm include mask limit fails, trigger events and buffers full.

The actions that PicoScope can execute include saving a file, playing a sound, executing a program or triggering the signal generator / AWG.

Alarms, coupled with mask limit testing help create a powerful and time saving waveform monitoring tool.  Capture a known good signal, auto generate a mask around it and then use the alarms to automatically save any waveform (complete with a time/date stamp) that does not meet specification.

High-end features as standard

Buying a PicoScope is not like making a purchase from other oscilloscope companies, where optional extras considerably increase the price. With our scopes, high-end features such as serial decoding, mask limit testing, advanced math channels, segmented memory, and a signal generator are all included in the price.

To protect your investment, both the PC software and firmware inside the scope can be updated. Pico Technology have a long history of providing new features for free through software downloads. We deliver on our promises of future enhancements year after year, unlike many other companies in the field. Users of our products reward us by becoming lifelong customers and frequently recommending us to their colleagues.


Passive oscilloscope probes

Our ergonomically designed passive oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the PicoScope range of USB Oscilloscopes. Passive probes don’t require a power supply or batteries so are lightweight and easily portable.

Active oscilloscope probes

This range includes high-voltage probes that extend the input range of your scope, and high-frequency probes that boost its input impedance for more accurate measurements.

All active probes require a power supply or batteries. Our battery-powered probes are supplied complete with batteries, while optional AC adaptors are available for the externally powered types.

Current probes (clamps)

Clamp-on current probes or “current clamps” enable you to measure currents without breaking the electrical circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped shut to form a magnetic loop around the conductor.

Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.

Our range of current clamps can be used with Pico Oscilloscopes and Pico Data Loggers, as well all major brands of oscilloscopes and multimeters.

BNC terminators and leads

All our BNC terminators, attenuators, leads and adaptors are compatible with 50 Ω BNC connectors.

Clips, leads and 4 mm probes

From gator/croc clips to acupuncture probes, here you will find a variety of popular accessories for use with test and measurement equipment.

Our test clips are suitable for general-purpose test and measurement as well for automotive diagnostics applications. The test clips are designed for use with our range of test leads.


We supply single-axis and three-axis accelerometers that connect to an oscilloscope for measuring noise and vibration.



Model number PicoScope 3000 Series Oscilloscopes (includes probes)
PicoScope 3203D PC Oscilloscope 2 channels with FG/AWG,50 MHz
PicoScope 3203D MSO PC Oscilloscope MSO 2+16 channels with FG/AWG,50 MHz
PicoScope 3204D PC Oscilloscope 2 channels with FG/AWG,70 MHz
PicoScope 3204D MSO PC Oscilloscope MSO 2+16 channels with FG/AWG, 70 MHz
PicoScope 3205D PC Oscilloscope 2 channels with FG/AWG,100 MHz
PicoScope 3205D MSO PC Oscilloscope MSO 2+16 channels with FG/AWG, 100 MHz
PicoScope 3206D PC Oscilloscope 2 channels with FG/AWG,200 MHz
PicoScope 3206D MSO PC Oscilloscope MSO 2+16 channels with FG/AWG, 200 MHz
PicoScope 3403D PC Oscilloscope 4 channels with FG/AWG,50 MHz
PicoScope 3403D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 50 MHz
PicoScope 3404D PC Oscilloscope 4 channels with FG/AWG,70 MHz
PicoScope 3404D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 70 MHz
PicoScope 3405D PC Oscilloscope 4 channels with FG/AWG,100 MHz
PicoScope 3405D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 100 MHz
PicoScope 3406D PC Oscilloscope 4 channels with FG/AWG,200 MHz
PicoScope 3406D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 200 MHz
Model number Replacement probes for PicoScope 3000 Series
MI007 60MHz probe for PicoScope 3×03, x1/x10, 1.2m
TA132 150MHz probe for PicoScope 3×04/5, x1/x10, 1.2m
TA131 250MHz probe for PicoScope 3×06, x1/x10, 1.2m
TA139 Pack of 10 Digital test clips (8 x red, 2 x black) for MSO
TA136 Digital interface cable for PicoScope 2000/3000 MSO



PicoScope 3000D Series Data Sheet

PicoScope 3000D Series User’s Guide

PicoScope 6 User’s Guide


PicoScope 3000 Series oscilloscope specifications

Oscilloscope — vertical (analog inputs)
Model PicoScope 3203D
PicoScope 3204D
PicoScope 3205D
PicoScope 3206D
PicoScope 3403D
PicoScope 3404D
PicoScope 3405D
PicoScope 3406D
Input channels 2 channels, BNC single-ended 4 channels, BNC single-ended
(−3 dB)
50 MHz 70 MHz 100 MHz 200 MHz 50 MHz 70 MHz 100 MHz 200 MHz
Rise time (calculated) 7.0 ns 5.0 ns 3.5 ns 1.75 ns 7.0 ns 5.0 ns 3.5 ns 1.75 ns
Hardware bandwidth limiter Switchable, 20 MHz
Vertical resolution 8 bits
Input ranges ±20 mV to ±20 V full scale in 10 ranges
Input sensitivity 4 mV/div to 4 V/div in 10 vertical divisions
Input coupling AC / DC, programmable
Input characteristics 1 MΩ ±1%, in parallel with 14 pF ±1 pF
DC accuracy ±3% of full scale ±200 μV
Analog offset range
(vertical position adjust)
±250 mV (20 mV, 50 mV, 100 mV, 200 mV ranges)
±2.5 V (500 mV, 1 V, 2 V ranges)
±20 V (5 V, 10 V, 20 V ranges)
Offset adjust accuracy ±1% of offset setting, additional to DC accuracy
Over voltage protection ±100 V (DC + AC peak)
Oscilloscope — vertical (digital inputs, MSOs only)
Input channels 16 channels (2 ports of 8 channels each)
Input connectors 2.54 mm pitch, 10 x 2 way connector
Maximum input frequency 100 MHz (200 Mb/s)
Minimum detectable pulse width 5 ns
Input impedance (with TA136 cable) 200 kΩ ±2% ∥ 8 pF ±2 pF
Input dynamic range ±20 V
Digital threshold range ±5 V
Overvoltage protection ±50 V
Threshold grouping Two independent threshold controls: D0 to D7, and D8 to D15
Threshold selection TTL, CMOS, ECL, PECL, user-defined
Threshold accuracy ±100 mV
Minimum input voltage swing 500 mV pk-pk
Channel-to-channel skew < 2 ns typical
Minimum input slew rate 10 V/µs
Oscilloscope — horizontal
Model PicoScope 3203D & MSO PicoScope 3204D & MSO PicoScope 3205D & MSO PicoScope 3206D & MSO PicoScope 3403D & MSO PicoScope 3404D & MSO PicoScope 3405D & MSO PicoScope 3406D & MSO
Maximum sampling rate (real-time) 1 GS/s (1 analog channel in use)
500 MS/s (up to 2 analog channels or 8-channel digital ports in use)
250 MS/s (up to 4 analog channels or 8-channel digital ports in use)
125 MS/s (all other combinations)
Maximum sampling rate(repetitive signals)* 2.5 GS/s 5 GS/s 10 GS/s 2.5 GS/s 5 GS/s 10 GS/s
Maximum sampling rate
(continuous streaming mode)
10 MS/s in PicoScope software
125 MS/s when using the supplied SDK (PC-dependent)
Maximum capture rate 100,000 waveforms/second (PC-dependent)
Time base ranges 1 ns/div to 5000 s/div 500 ps/div to 5000 s/div 1 ns/div to 5000 s/div 500 ps/div to 5000 s/div
Buffer memory 64 MS 128 MS 256 MS 512 MS 64 MS 128 MS 256 MS 512 MS
Buffer memory (streaming) 100 MS in PicoScope software.
Up to available PC memory when using supplied SDK.
Maximum buffer segments 10 000 in PicoScope software
130 000 using SDK 250 000 using SDK 500 000 using SDK 1 000 000 using SDK 130 000 using SDK 250 000 using SDK 500 000 using SDK 1 000 000 using SDK
Time base accuracy ±50 ppm ±2 ppm ±50 ppm ±2 ppm
Time base drift per year ±5 ppm ±1 ppm ±5 ppm ±1 ppm
Sample jitter 3 ps RMS typical
ADC sampling Simultaneous on all enabled channels

* channel A only

Dynamic performance
Model PicoScope 3203D & MSO PicoScope 3204D & MSO PicoScope 3205D & MSO PicoScope 3206D & MSO PicoScope 3403D & MSO PicoScope 3404D & MSO PicoScope 3405D & MSO PicoScope 3406D & MSO
Crosstalk Better than 400:1 up to full bandwidth (equal voltage ranges)
Harmonic distortion < −50 dB at 100 kHz full scale input
SFDR 52 dB typical at 100 kHz full scale input
(except ±20 mV range: 44 dB)
Noise 110 µV RMS 160 µV RMS 110 µV RMS 160 µV RMS
(typical, on ±20 mV range)
Bandwidth flatness +0.3 dB, −3 dB from DC to full bandwidth, typical
Triggering – general
Source Analog channels, EXT trigger (not MSOs), digital channels (MSOs only)
Trigger modes None, auto, repeat, single, rapid (segmented memory)
Maximum pre–trigger capture Up to 100% of capture size
Maximum post–trigger delay Up to 4 billion samples (selectable in 1 sample steps)
Trigger rearm time < 0.7 µs at 1 GS/s sampling rate
Maximum trigger rate Up to 10,000 waveforms in a 6 ms burst at 1 GS/s sampling rate, typical
Triggering – analog channels
Advanced triggers Edge, window, pulse width, window pulse width, dropout, window dropout, interval, logic, runt pulse
Trigger types (ETS mode) Rising edge, falling edge (Ch A only)
Trigger sensitivity Digital triggering provides 1 LSB accuracy up to full bandwidth of scope
Trigger sensitivity (ETS mode) 10 mV p-p typical (at full bandwidth)
Triggering – EXT trigger input, not MSO models
Connector type Front panel BNC
Advanced triggers Edge, pulse width, dropout, interval, logic
Input characteristics 1 MΩ || 14 pF
Bandwidth 50 MHz 70 MHz 100 MHz 200 MHz 50 MHz 70 MHz 100 MHz 200 MHz
Threshold range ±5 V
Coupling DC
Overvoltage protection ±100 V (DC + AC peak)
Triggering – digital channels, MSO models only
Source D0 to D15
Trigger types Pattern, edge, combined pattern and edge, pulse width, dropout, interval, logic
Function generator
Standard output signals Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine, white noise, PRBS
Standard signal frequency DC to 1 MHz
Sweep modes Up, down, dual with selectable start / stop frequencies and increments
Triggering Free-run, or from 1 to 1 billion counted waveform cycles or frequency sweeps. Triggered from scope trigger or manually.
Output frequency accuracy As oscilloscope
Output frequency resolution < 0.01 Hz
Output voltage range ±2 V
Output voltage adjustment Signal amplitude and offset adjustable in approximate 1 mV steps within overall ±2 V range
Amplitude flatness < 0.5 dB to 1 MHz typical
DC accuracy ±1% of full scale
SFDR > 60 dB 10 kHz full scale sine wave
Output impedance 600 Ω
Connector type Front panel BNC (non-MSO models)
Rear panel BNC (MSO models)
Over voltage protection ±20 V
Arbitrary waveform generator
Update rate 20 MS/s
Buffer size 32 kS
Resolution 12 bits (output step size approximately 1 mV)
Bandwidth > 1 MHz
Rise time (10% to 90%) < 120 ns

Other AWG specifications as function generator

Probe compensation output
Impedance 600 Ω
Frequency 1 kHz
Level 2 V pk-pk, typical
Spectrum analyzer
Frequency range DC to maximum bandwidth of scope
Display modes Magnitude, peak hold, average
X axis Linear or log 10
Y axis Logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts)
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat-top
Number of FFT points Selectable from 128 to 1 million in powers of 2
Math channels
General functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, delay
Filter functions Low pass, high pass, band stop, band pass
Graphing functions Frequency, duty cycle
Multi-waveform functions Min, max, average, peak
Operands All analog and digital input channels, reference waveforms, time, constants, pi
Automatic measurements (analog channels only)
Oscilloscope mode AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate
Spectrum mode Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average, standard deviation
Serial decoding
Protocols CAN, FlexRay, I²C, I²S, LIN, SPI, UART/RS-232
Mask limit testing
Statistics Pass/fail, failure count, total count
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, fast, custom
Output functions Copy to clipboard, print
Windows software PicoScope for Windows
Software development kit (SDK)
Windows 7, 8 or 10 recommended (read more)
Mac OS X software PicoScope for Mac OS X (beta)
Software development kit (SDK)
Mac OS X version 10.9 or 10.10 recommended
Linux software PicoScope for Linux (beta)
Software development kit (SDK)
See Linux Software & Drivers for details of supported distributions
Languages Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish
Physical specifications
Dimensions 190 mm x 170 mm x 40 mm (including connectors)
Weight < 0.5 kg
Temperature range Operating: 0 °C to 40 °C (15 °C to 30 °C for stated accuracy).
Storage: –20 °C to 60 °C
Humidity range Operating: 5% RH to 80% RH non-condensing.
Storage: 5% RH to 95% RH non-condensing
Altitude range Up to 2000 m
Pollution degree 2
Package contents PicoScope 3000D Series oscilloscope
2 or 4 switchable 10:1/1:1 oscilloscope probes
Quick Start Guide
Software and reference CD
USB 3.0 cable
AC power adaptor (4-channel models only)
TA136 digital cable (MSOs only)
2 × TA139 pack of 10 logic test clips (MSOs only)
PC connectivity USB 3.0 SuperSpeed (USB 2.0 compatible)
Power requirements Powered from a single USB 3.0 port or two USB 2.0 ports.
4-channel models: AC adaptor included for use with USB ports that supply less than 1200 mA
Safety approvals Designed to EN 61010-1:2010
EMC approvals Tested to EN 61326-1:2006 and FCC Part 15 Subpart B
Environmental approvals RoHS and WEEE compliant
149 queries in 1.696 seconds.