LCR Pro1
LCR Elite1 OverviewLCR Elite1 Operation GuideLCR Elite1 Accuracy ComparisonUltra-Precise TipsHigh Definition User InterfacePC Communication

LCR Pro1

World’s first tweezer-style LCR meter with 0.1% accuracy and PC connectivity
  • Easy operation – one hand use, full set of shortcuts
  • Fully auto/manual selection
  • High accuracy – R: 0.1%, L: 0.2%, C: 0.2%
  • 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
  • 3 test voltages – 0.2Vrms, 0.5Vrms, 1.0Vrms
  • Multiple functions – R, L, C, Z, ESR, DCR, D, Q, θ, etc.
  • Small size – 151 x 19 x 15mm
  • Large OLED display – 0.96″, 128 x 64 resolution
  • Ultra precise gold plated tips
  • Rechargeable LiPO battery with USB charging
  • PC remote control for data logging and programming
  • Additional functions – sorting, recording, diode and continuity

Description

LCR Pro1 integrates a pair of tweezers like probes and an LCR meter into a single compact, lightweight, battery powered device. It is an all-in-one portable device that provides a simple and efficient solution for not only measuring SMD components, but also making in-circuit debugging.

LCR Pro1 is an ideal device for many applications including components verification and sorting, production lines, laboratory and service center, in-field repair and more.

 A Breakthrough in Accuracy 

A Breakthrough in Accuracy

LCR Pro1 delivers high accuracy once found only in high-end desktop LCR meters. It provides basic accuracy 0.1% for resistance and 0.2% for capacitance and inductance with 5-digit resolution. Each device is fully calibrated during production and shipped with NIST (National Institute of Standards and Technology) traceable calibration certificate.

The test frequencies can be selected from 100Hz to 100kHz. 100kHz is ideal for measuring small inductance under 1uH. The test voltage can be selected from 0.2Vrms to 1.0Vrms. 1.0Vrms allows precision measurements of ceramic capacitors with high dielectric constant (K), such as  X5R type. 0.2Vrms is specially designed for in-circuit debugging because it is low enough to prevent the silicon chips from being active during measurement.

Ultra-Precise Tips

Ultra-Precise Tips 

The redesigned gold-plated tips are more precise than ever. You can use them to pick up and measure SMD components quickly and reliably, even for parts down to sizes of 01005.

Thanks to the precise tips, you can easily reach the component under test without touching the adjacent components during in-circuit troubleshooting even in a very crowded area.

High Definition User Interface

High Definition User Interface

LCR Pro1 comes with a 0.96″ OLED display, doubling the size of its predecessor’s 0.91″ display. The pixels are doubled as well from 128*32 to 128*64. Larger font and more information can be displayed for you to read the results and navigate the menu more conveniently.

LCR Pro1 is full of handy shortcuts to help you switch all kinds of parameters faster and easier. During measurements, you can quickly select different settings by single clicking, double clicking or holding the navigation button.

PC Communication

PC Communication

 

LCR Pro1 is able to make measurements and charge its battery simultaneously when it connects to a PC via the Link1, a USB dongle style communication module. Using the GUI Data Logger software, you can remote control the device from a PC for parameter setup, programming and data logging.

 

 

 

 

 

Features

LCR Pro1 Key Features

LCR Pro1 Key Features

  • Easy operation – one hand use, full set of shortcuts
  • Fully auto/manual selection
  • High accuracy – R: 0.1%, L: 0.2%, C: 0.2%
  • 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
  • 3 test voltages – 0.2Vrms, 0.5Vrms, 1.0Vrms
  • Multiple functions – R, L, C, Z, ESR, DCR, D, Q, θ, etc.
  • Small size – 151 x 19 x 15mm
  • Large OLED display – 0.96″, 128 x 64 resolution
  • Ultra precise gold plated tips
  • Rechargeable LiPO battery with USB charging
  • PC remote control for data logging and programming
  • Additional functions – sorting, recording, diode and continuity

 

Downloads

Quick Start Guide

User Manual

Specification

 

Testing Signal
Test Frequency 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Test Voltage 0.2Vrms/0.5Vrms/1.0Vrms
Source Impedance 100Ω

 

Measurement Range
Resistance 25mΩ to 10MΩ
Capacitance 0.25pF to 1mF
Inductance 10nH to 1H

 

Basic Accuracy *
Resistance 0.10%
Capacitance 0.20%
Inductance 0.20%

 

Product Characteristics
Dimensions (L x W x H) 151 x 19 x 15mm
Weight: 30 grams
Charging Time 2.5 hours (typical)
Battery Life All day in typical use, one year in standby
149 queries in 3.794 seconds.