PHASE NOISE ANALYZERS

10MHz – 20GHz PHASE NOISE ANALYZERS

0.1Hz - 1MHz Offset Range, < -190 dBc/Hz at 10kHz OS Noise Floor

Features

REVISION C INTRODUCTION: 10MHz – 20GHz¹ with 40MHz Measurement Offset Capability

As with prior generations, Holzworth’s to be released HA7062C Phase Noise Analyzer is designed to do the job fast and to do it right, without hassle. There is no guess work as to whether results are valid to the DUT or if there are unwanted variations or contributions coming from the measurement system itself.

ACCURACY: Holzworth analyzers are capable of reaching theoretical measurement limits for the highest performing DUTs. Holzworth applies an ANSI z540 calibration to every analyzer built, creating data traceability to the industry standards set forth by NIST.

 HA7062 PHASE NOISE ANALYZER

The HA7062 is a fully integrated phase noise analyzer. It utilizes the same core engine from our model HA7402B along with a pair of HSM Series RF Synthesizers. The stability of the agile synthesizers operating as LO sources for the high speed, cross correlation core enables an extremely reliable phase noise analyzer.

  HA7062B SPECIFICATIONS

Part No.
Measurement
Carrier Range
Offset Range
Measurement Noise Floor
Brochure
Datasheet
HA7062B
Absolute & Residual
10MHz – 20GHz ¹
0.1Hz – 1MHz
< -190 dBc/Hz at 10kHz OS
HA7062C Absolute & Residual 10MHz – 20GHz ¹ 0.1Hz – 40MHz < -190 dBc/Hz at 10kHz OS April 2015

¹ 6.4GHz to 20GHz DUT measurements require Holzworth accessory model No. HX4920 (Downconverter)

HA7402B CROSS CORRELATION ENGINE

The HA7402B cross correlation engine is preferred by oscillator manufacturers as the best means to achieve the lowest possible phase noise measurements in the shortest amount of time. The user supplies 2 frequency matched LOs, the automated HA7042B will calibrate the LOs and acquire data. No fuss.

HA7402B SPECIFICATIONS

Part No.
Measurement
LO/Carrier Range
Offset Range
Measurement Noise Floor
Brochure
Datasheet
HA7402B
Absolute & Residual
10MHz – 6.4GHz ¹
0.1Hz – 1MHz
< -190 dBc/Hz at 10kHz OS

¹ 6.4GHz to 20GHz DUT measurements require Holzworth accessory model No. HX4920 (Downconverter)

PHASE NOISE ANALYZERS

Videos

Specification

APPLICATION GUI or ATE Programs

Holzworth’s software development team places a high level of attention to intuitive functionality. The phase noise analyzer GUI is primarily designed with manufacturing test in mind so that the requirement for support is low. The API is also designed to operate with commercial and proprietary ATE test programs so that the analyzer can be a truly integral part of a larger system.

HA7062B SPECIFICATIONS

Part No.
Measurement
Carrier Range
Offset Range
Measurement Noise Floor
Brochure
Datasheet
HA7062B
Absolute & Residual
10MHz – 20GHz ¹
0.1Hz – 1MHz
< -190 dBc/Hz at 10kHz OS
HA7062C Absolute & Residual 10MHz – 20GHz ¹ 0.1Hz – 40MHz < -190 dBc/Hz at 10kHz OS April 2015

 

¹ 6.4GHz to 20GHz DUT measurements require Holzworth accessory model No. HX4920 (Downconverter)

HA7402B CROSS CORRELATION ENGINE

The HA7402B cross correlation engine is preferred by oscillator manufacturers as the best means to achieve the lowest possible phase noise measurements in the shortest amount of time. The user supplies 2 frequency matched LOs, the automated HA7042B will calibrate the LOs and acquire data. No fuss.

HA7402B SPECIFICATIONS

Part No.
Measurement
LO/Carrier Range
Offset Range
Measurement Noise Floor
Brochure
Datasheet
HA7402B
Absolute & Residual
10MHz – 6.4GHz ¹
0.1Hz – 1MHz
< -190 dBc/Hz at 10kHz OS

 

¹ 6.4GHz to 20GHz DUT measurements require Holzworth accessory model No. HX4920 (Downconverter)

140 queries in 5.103 seconds.