34 CHANNEL LA1034 LOGICPORT LOGIC ANALYZER

34 CHANNEL LA1034 LOGICPORT LOGIC ANALYZER

34 x 2048 Sample buffer, 250MHz max, 4ns minimum pulse width trigger sequencer
  • 500MHz Timing-Mode (Internal Clock)
  • 200MHz State-Mode (External Clock)
  • Advanced Multi-Level Triggering
  • Real-Time Sample Compression
  • +6V to -6V Adjustable Logic Threshold
  • CAN, I2C, SPI, RS232, 1-Wire and more
  • Built-in 300MHz Frequency Counter
  • USB 1.1 and 2.0 Compatible

Description

Our LA1034 LogicPort logic analyzer fills the void between expensive analyzers with many channels, and inexpensive analyzers with few channels and limited sample rates.

The LogicPort provides 34 channels sampled at 500MHz. This includes two state-clock inputs which function as normal sampled channels in timing-mode. The LogicPort logic analyzer’s hardware is controlled and powered via your PC’s USB 1.1 or 2.0 port for the ultimate in convenience and portability.

Features include multi-level sequential trigger capability, qualified state-mode sampling with adjustable setup/hold window, selectable logic sense and threshold, built-in interpreters for CAN, I2C, SPI, 1-wire, RS232 and ISO7816-3 (SIM/Smart Card) protocols and much more.

The LogicPort’s advanced trigger features allow it to trigger on simple or complex sequences of edges, patterns and bus numerical ranges, as well as on specified pattern, range or pulse durations.

You’ll find the LogicPort to be feature-rich, yet simple to use. Visit our downloads page to try the free logic analyzer support software for yourself. The installation includes real-world examples of actual acquired data. Explore a 125MHz SDRAM interface sampled at 500MHz, the outputs of a 100MHz A/D converter sampled in state mode, interpreted CAN, I2C, SPI, 1-Wire, SIM and RS232 data streams, activity on a typical Intel processor bus and more.

Ordering

LA1034 LogicPort Logic analyzer with Input probe and USB cable.

Downloads

Enter your name and email to download DataSheet,UserManual



Name:
Email:
 

Specification

 

LA1034 LogicPort Specifications and Characteristics
Sampled channels: 34
Timing mode sample rate: 1KHz to 500MHz (uses internal clock)
State mode sample rate: 0 to 200MHz (clock provided by circuit under test)
Sample buffer: 34 x 2048 samples
Maximum sample compression: 2^33 to 1 (sample rates to 200MHz)
Trigger sequencer: 250MHz max, 4ns minimum pulse width
Trigger capability:
    Edges – Rising, Falling, Either (multiple channels, any combination)
    Patterns – True, False, Entered, Exited (across any / all channels)
    Bus Value – Equal, Not Equal, Less Than, Greater Than, In Range, Not in Range
    Occurrence Count – Range of 1 to 1,048,576 Consecutive or Cumulative
    Duration – Equal, Less Than, Greater Than, Within Range (samples or time)
Input impedance: 200K Ohms, paralleled by <5pF
Frequency counter range: 300MHz with 10Hz resolution, 4 channels
Threshold range: adjustable +6 to -6 volts with 50mv resolution
Threshold accuracy: +/-(100mV + 5% of setting)
Channel to channel skew: 0.6ns typical, 1.0ns max
State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @150MHz, 0.8Vpp @250MHz
Input dynamic range: 10 volts peak-peak
Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude
Timebase accuracy: +/-0.005% over full temperature range
Input Probe: Teflon insulated leads terminated with female contacts
compatible with 0.025″-0.030″ round or square pins
Power supply current: 200 milliamps max (supplied by USB)
Temperature range: operating +5 to +50C, storage -10 to +65C
Interpreted Protocols (included):
    Asynchronous Serial (RS232, RS422 and RS485 to 25Mbps)
    Synchronous Serial (SPI, PS2 and proprietary formats)
    Inter-Integrated-Circuit (I2C)
    CAN 2.0A and 2.0B
    Synchronous Parallel (Quad/multi-IO SPI and proprietary formats)
    1-Wire (Dallas/Maxim devices/iButton)
    ISO7816-3 (Smart Card and SIM devices)
Minimum system requirements:
    Pentium II or better (400MHz or faster recommended)
    32MB available memory
    20MB available disk space
    800 x 600 (1024 x 768 recommended) standard DPI display
    USB 1.1 or 2.0 port
The LA1034 is compatible with the following operating systems:
    Windows 98
    Windows 98 Second Edition
    Windows ME
    Windows 2000
    Windows XP (32 and 64 bit versions)
    Windows Vista (32 and 64 bit versions)
    Windows 7 (32 and 64 bit versions)
    Windows 8 (32 and 64 bit versions except ARM-based)
Specifications subject to change without notice

 

142 queries in 6.907 seconds.